Zoeller®

Zoeller® 163-0002 High Head Flow-Mate 160 1-Phase Single Seal Submersible Effluent Pump, 100 gpm Maximum, Non-Automatic, 66 ft Maximum Head, 115 VAC

919822 MFG #: 163-0002
$1,395.00 / ea
Zoeller® 163-0002 High Head Flow-Mate 160 1-Phase Single Seal Submersible Effluent Pump, 100 gpm Maximum, Non-Automatic, 66 ft Maximum Head, 115 VAC
  • Amperage Rating: 15
  • Automatic/Non Automatic: Non-Automatic
  • Bearing Type: Ball
  • Cord Type: 3-Wire Neoprene
  • Dimensions: 12-3/4 in W x 19-5/16 in H
  • Frequency Rating: 60
  • Horsepower: 1/2
  • Impeller Type: Bronze Non-Clogging Vortex
  • Material: Cast Iron
  • Maximum Flow Rate: 100
  • Maximum Head: 66
  • Motor Speed: 3450
  • Outlet Size: 1-1/2 in NPT
  • Series: High Head Flow-Mate 160
  • Temperature Rating: 130
  • Type: Single Seal
  • Voltage Rating: 115
  • Phase: 1

Zoeller® Submersible Effluent Pump, 1-Phase Single Seal, Series: High Head Flow-Mate 160, 100 gpm Maximum Flow Rate, Non-Automatic Automatic/Non Automatic, 1-1/2 in NPT Outlet, 66 ft Maximum Head, 1/2 hp, 115 VAC, 15 A, 60 Hz, 3450 rpm Motor, 3-Wire Neoprene Cord, Bronze Non-Clog Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H

Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.

QTY
Add to List
  • Features
  • Durable, cast iron constructed switch case, base, motor and pump housing
  • Cast iron Class 25-30 (25,000X tensile strength)
  • Impeller - bronze class 85-5-5-5
  • Corrosion resistant, powder coated epoxy finish
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
  • Upper and lower ball bearing running in bath of oil
  • Carbon and ceramic shaft seal
  • No screens to clog
  • Neoprene square ring and gasket
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Passes 3/4 in (19 mm) spherical solids
  • 1-1/2 in NPT discharge with 2 or 3 in flange available
  • Automatic units available with float-operated, submersible, 2-pole mechanical switch
  • On point - 14-3/4 in, off point - 5 in
  • 100% of units are computerized tested
  • Standard/Approvals: cCSAus Certified, SAE 1117 Carbon Steel Motor Shaft, SSPMA Standard, UL Listed