Woodford® RHY2-1-MS Model RHY2-MS Freezeless Roof Hydrant With Mounting System, 1 in, 1 ft Bury, 48-1/2 in OAL, 100 psi, Domestic
- Bury Depth: 1
- Domestic/Import: Domestic
- End Style: FNPT
- Nominal Size: 1
- Overall Length: 48-1/2
- Pressure Rating: 100
- Series: Model RHY2-MS
- Temperature Rating: 120
- Type: Freezeless
Woodford® Roof Hydrant, Freezeless, Series: Model RHY2-MS, 1 in Nominal Size, 1 ft Bury Depth, 100 psi, FNPT, 48-1/2 in Overall Length, 120 deg F, Domestic
The patented Woodford® RHY2-MS is intended for irrigation purposes and to provide water availability on commercial building roofs. Applications include window washing, cleaning of condenser coils, cooling towers and other types of roof equipment. The RHY2 is backflow protected with an ASSE 1052 double check backflow preventer that is field testable. The backflow device does not require removal for drain down. The RHY2 has a built in vent that allows drainage. Valve body of hydrant is drilled and tapped with 1/8 in drain hole which must be piped to a drain location. The RHY2-MS allows for installation flexibility since it is not necessary to install hydrant when the patented Mounting System is bolted to the roof. The Mounting System utilizes a 3 in opening that allows the hydrant to be installed later if desired. All necessary mounting hardware for proper installation on a commercial roof is supplied, including a 2 deg shim for pitch adjustment.
- Features
- Rod guide eliminates side pull on rod, reduces wear on packing, packing nut and stem
- Adjustable link for easy adjustment and positive lever lock tension
- 1-piece variable flow plunger with large cushion type seal for longer life is not easily damaged and assures shut-off even when foreign particles are present
- Hydrant automatically drains when shut-off even with hose attached
- All hydrant repairs can be made from top of unit without removing hydrant
- Model 50HF hose connection backflow preventer with 3/4 in hose connection
- Field testable dual check holds against 125 psi backflow pressure
- 1-1/4 in US made galvanized pipe casing
- 1/8 in NPT drain hole
- Cast iron hydrant support
- Cast iron under deck flange
- 4 bolts draw tight against the roof decking and the hydrant support
- 3 clamp screws tighten against the hydrant pipe to secure the hydrant's vertical position through the roof
- Well seal seals tight between the hydrant support and hydrant pipe
- EPDM Boot covers well seal and top of hydrant support
- 2 deg shim is supplied, if needed, for installation on pitched roofs
- Standard/Approvals: ASSE 1052
- WARRANTY: 5 Years Limited