PPP® SWA-1000C Sweat-On Water Hammer Arrester, 1 in, C, 0 to 80 psig, 33 to 60 Fixture Unit Capacity, Domestic
PPP® Water Hammer Arrester, Lead Free, Sweat-On, 1 in Nominal, C, 0 to 80 psig, 33 to 60 Fixture Unit Capacity, -40 to 212 deg F, Copper Body, EPDM O-Ring, 11-1/2 in OAL, Domestic
Documents
- Least expensive to install
- Designed to solder in standard copper elbows and tees
- May be installed in new or existing plumbing systems with a standard pipe tee
- Maintenance free
- Copper or free turning brass cap
- Composite material piston
- Dow-corning silicone compound #111, FDA listed for use in potable water systems seal lubricant
- Nickel plated for salt water application
- Standard/Approvals: ASSE 1010|Listed by Recognized National Standards|UPC Listed|PROP65: Cancer and Reproductive harm www.p65warnings.ca.gov
PPP® Water Hammer Arrester, Lead Free, Sweat-On, 1 in Nominal, C, 0 to 80 psig, 33 to 60 Fixture Unit Capacity, -40 to 212 deg F, Copper Body, EPDM O-Ring, 11-1/2 in OAL, Domestic
Precision Plumbing Products is again the first to offer a complete series, 1/2 in through 2 in sweat on, water hammer Arrester. All Arresters meet and/or exceed performance requirements as set forth by the ASSE standard 1010. The sweat on Arrester will provide a maintenance free installation when installed in accordance with the manufacturers recommendations.
- Brand: PPP®Body Material: CopperDimensions: 11-1/2 in OALDomestic/Import: DomesticEnd Style: CNominal Size: 1Pressure Rating: 0 to 80Softgoods Material: EPDM O-RingTemperature Rating: -40 to 212Type: Sweat-On
PPP® SWA-1000C Sweat-On Water Hammer Arrester, 1 in, C, 0 to 80 psig, 33 to 60 Fixture Unit Capacity, Domestic
PPP® Water Hammer Arrester, Lead Free, Sweat-On, 1 in Nominal, C, 0 to 80 psig, 33 to 60 Fixture Unit Capacity, -40 to 212 deg F, Copper Body, EPDM O-Ring, 11-1/2 in OAL, Domestic