AO Smith® ProLine® 100295405 ENL-30 Lowboy Top Connect Electric Water Heater, 28 gal Tank, 240 VAC, 9000 W, 1 ph
- ASME Yes/No: No
- Dimensions: 24 in Dia x 31-1/4 in H
- Energy Factor: 0.9
- Heating Element: (2) Copper/Incoloy®
- Phase: 1
- Power Rating: 9000
- Pressure Rating: 150
- Recovery Rate: 21 gph at 90 deg F Rise
- Series: ENL-30
- Tank Capacity: 28
- Type: Lowboy Top Connect
- Voltage Rating: 240
- Water Connection: 3/4 in MNPT
AO Smith® ProLine® Electric Water Heater, Lowboy Top Connect, Series: ENL-30, 28 gal Tank, 240 VAC, 9000 W, 1 ph, 3/4 in MNPT Water Connection, (2) Copper/Incoly® Heating Element, 0.9 Energy Factor, 21 gph at 90 deg F Rise Recovery, 150 psi, ASME Yes/No: No, 24 in Dia x 31-1/4 in H
The ProLine® Standard electric water heater is the reliable choice when you are looking to maximize your hot water output and is designed with environmentally-friendly insulation to reduce standby heat loss. With a 28 gal (nominal) tank delivering 4500 W, the ENL-30 delivers a first hour rating of 44 gal at an Uniform Energy Factor of 0.9. The Coregard™ sacrificial anode helps protect the tank from the corrosive effects of water and is accompanied by a 6-year limited tank warranty.
- Features
- Enhanced heating elements
- Incoloy® stainless steel lower element lasts longer than a standard copper element
- Dynaclean™ diffuser dip tube
- Helps reduce lime and sediment buildup and maximizes hot water output
- Made from long-lasting PEX cross-linked polymer (diffuser design is not used on lowboy models)
- High energy factors
- Eco-friendly non-CFC foam insulation, heat traps and other features combine to yield a higher Energy Factor that maximizes savings on operating costs
- Coregard™ anode rod
- Our anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods
- Blue Diamond® glass coating
- Provides superior corrosion resistance compared to industry standard glass lining
- Enhanced-flow brass drain valve
- Our residential water heaters have a solid brass, tamper resistant, enhanced-flow, ball type, drain valve
- Uses a standard female hose fitting that allows for fast and easy draining during maintenance
- Designed for easy operation, this valve includes an integral screwdriver slot that features a 1/4 turn (open/close) radius, which not only permits full straight-through water flow but also a quick and positive shut off
- 60 Hz
- Low lead content
- Standard/Approvals: CSA Certified|CSA Certified and ASME Specified T&P Relief Valve|UL Listed|Meets UBC and ICC National Codes and listed with CEC|Federal Energy Conservation Standards with Energy Policy and Conservation Act (EPCA)
- INCLUDES: Temperature and Pressure Relief Valve
- WARRANTY: 6 Years Limited Tank and Parts