Takagi

Takagi 100123396 H3S Series Tankless Water Heater, Natural Gas Fuel, 180000 Btu/hr Heating, Indoor/Outdoor: Indoor, Condensing, 8 gpm Flow Rate, Direct/Power Vent, 4 in Vent, 0.95, Commercial/Residential

1137181 MFG #: 100123396
$1,900.00 / ea
Takagi 100123396 H3S Series Tankless Water Heater, Natural Gas Fuel, 180000 Btu/hr Heating, Indoor/Outdoor: Indoor, Condensing, 8 gpm Flow Rate, Direct/Power Vent, 4 in Vent, 0.95, Commercial/Residential
  • Commercial/Residential/Dual: Commercial/Residential
  • Condensing/Non condensing: Condensing
  • Dimensions: 17-3/4 in W x 10-3/4 in D x 22-1/2 in H
  • Energy Factor: 0.95
  • Flow Rate: 8
  • Fuel Type: Natural Gas
  • Gas Connection: 3/4 in NPT
  • Heating Capacity: 180000
  • Ignition Type: Electronic
  • Indoor/Outdoor: Indoor
  • Material: 316L Stainless Steel/Copper
  • Mounting Type: Wall
  • Pressure Rating: 4 to 10-1/2 in WC Gas/15 to 150 psi Water
  • Series: H3S
  • Ultra Low NOx: Yes
  • Vent Size: 4
  • Vent Type: Direct/Power
  • Water Connection: 3/4 in NPT

Takagi Tankless Water Heater, Series: H3S, 180000 Btu/hr Heating, Natural Gas Fuel, 3/4 in NPT Gas Connection, Electronic Ignition, Direct/Power Vent, 4 in Vent, Condensing Condensing/Non Condensing, 8 gpm Flow Rate, 0.95, Wall Mounting, 3/4 in NPT Water Connection, 4 to 10-1/2 in WC Gas/15 to 150 psi Water Pressure, Yes Ultra Low NOx, 316L Stainless Steel/Copper, Indoor Indoor/Outdoor, 17-3/4 in W x 10-3/4 in D x 22-1/2 in H, Commercial/Residential

The T-H3S-DV-N supplies hot water to domestic hot water systems (directly or indirectly) which can be used with storage tanks, recirculation systems, hydronic heating systems, radiant floor systems and/or domestic and heating applications. The T-H3S is a high efficient, condensing, tankless water heater perfect for residential applications. With gas inputs of 180000 Btu, the T-H3S can produce enough hot water for three bathrooms in warmer climates or two baths in colder climates.

QTY
Add to List
  • Features
  • Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel
  • Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
  • Complies with ultra-Low NOx regulations of less than 14 ng/J
  • Venting with SCH 40/STD PVC, CPVC, PP, category III stainless steel
  • Safety features include freeze, overheat, surge protection and troubleshooting diagnostic codes
  • Integrated temperature controller and advanced diagnostics
  • Standard/Approvals: AHRI Certified|ANSI Z21.10.3|CSA 4.3|EnergyStar® Qualified|NSF Approved|SCAQMD Rule 1146.2
  • WARRANTY: 15 Years Limited Residential, 6 Years Limited Comm