A.Y. McDonald 6634-153 K Series High-Head Effluent Pump, 10 gpm Max Flow, 170 ft Max Head, 115 VAC, 1 Phase
- Cord Type: SJOW
- Domestic/Import: Domestic
- Horsepower: 1/2
- Material: Thermoplastic
- Maximum Flow Rate: 10
- Maximum Head: 170
- Outlet Size: 1-1/4
- Series: 22050K2AJ X996
- Type: High-Head
- Voltage Rating: 115
- Phase: 1
A.Y. McDonald, 6634-153, Effluent Pump, High-Head, Series: K Series, 10 gpm Maximum, 1-1/4 in Outlet, 170 ft Maximum Head, 1/2 hp, 115 VAC, 1 ph, SJOW Cord, Thermoplastic, Domestic
Reinforced Thermoplastic motor bracket and discharge with built-in guide bearing. Sizes range from 1/2 to 1-1/2 hp. 300 series stainless steel top bearing and motor coupling. The 1/2 hp through 1 hp uses composite and 1-1/2 hp uses stainless steel motor. Two wire 1-phase models include pump, motor and 10 ft slow lead, 25 ft, 50 ft and 100 ft available. All four in submersibles are supplied with grounded leads meeting the National Electrical Code (N.E.C.) specifications. The performance curves on the following page will assist you in choosing the pump that meets your needs.
- Features
- Stainless steel pump shell and pump shaft
- Reinforced thermoplastic diffusers and impellers
- Internal, anti-spin check valve standard
- Powered by NEMA standard composite submersible motors
- Thermoplastic intake screen and cable guard
- 10 ft lead
- 1-1/4 in FNPT discharge
- Weighted average of the wetted surface of this no lead product contacted by consumable water contains less than one quarter of one percent (0.25%) lead
- Without check valve
- Standard/Approvals: National Electrical Code (N.E.C.) Specification|PROP65: This product can expose you to chemicals including lead, which is known to the State of CALIFORNIA to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov
- INCLUDES: No-Lead Brass Cable Guard, Cable Guard Screws with Hole Drilled into Center of Discharge
- WARRANTY: Limited