Bradford White® M-II-120-12-3SF-16 M-II-120-kW-3SF Electric Water Heater With Fuse, 119 gal Tank, 12000 W, 208 VAC, 3 ph, 33.3 FLA
- Amperage Rating: 33.3 A Full Load
- ASME Yes/No: No
- Dimensions: 30-1/4 in Dia x 66 in H
- Domestic/Import: Domestic
- Heating Element: (3) Screw-In Copper
- Material: Steel
- Mounting Type: Surface
- Phase: 3
- Power Rating: 12000
- Pressure Rating: 150
- Recovery Rate: 124 gph at 40 deg F Rise
- Series: M-II-120-kW-3SF
- Tank Capacity: 119
- Temperature Rating: 180
- Voltage Rating: 208
- Water Connection: 1-1/2 in NPT
- Wire Size: 16
Bradford White® Electric Water Heater, Series: M-II-120-kW-3SF, 119 gal Tank, 208 VAC, 33.3 FLA, 12000 W, 3 ph, 1-1/2 in NPT Water Connection, (3) Screw-In Copper Heating Element, 16 AWG Wire, Surface Mount, 124 gph at 40 deg F Rise Recovery, 150 psi, 180 deg F, ASME Yes/No: No, Steel, 30-1/4 in Dia x 66 in H, Domestic
MII Energy Saver models set the standard in commercial electric water heaters. They're available in an assortment of capacities, inputs and first hour deliveries so professionals have the solutions to any challenge. Unprecedented standard features like the Hydrojet® Sediment Reduction System ensure long lasting, top performance. These models are suited for areas where venting is not an option such as stadiums or environments with corrosive combustion air supply.
- Features
- Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F
- Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss
- Results in less energy consumption, improved operation efficiencies and jacket rigidity
- Factory installed Hydrojet® sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank
- Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
- Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service
- Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits
- Low restriction brass drain valve - Durable tamper proof design
- Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires
- Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode
- Standard/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453
- INCLUDES: Temperature and Pressure Relief Valve
- WARRANTY: 3 Years Limited Tank/1 Year Limited on Component P