Takagi

Takagi 100123445 H3 Series Tankless Water Heater, Liquid Propane Fuel, 199000 Btu/hr Heating, Indoor/Outdoor: Indoor, Condensing, 10 gpm Flow Rate, Direct/Power Vent, 4 in Vent, 0.93, Commercial/Residential

1137179 MFG #: 100123445
$2,342.00 / ea
Takagi 100123445 H3 Series Tankless Water Heater, Liquid Propane Fuel, 199000 Btu/hr Heating, Indoor/Outdoor: Indoor, Condensing, 10 gpm Flow Rate, Direct/Power Vent, 4 in Vent, 0.93, Commercial/Residential
  • Commercial/Residential/Dual: Commercial/Residential
  • Condensing/Non condensing: Condensing
  • Dimensions: 17-3/4 in W x 11-1/4 in D
  • Energy Factor: 0.93
  • Flow Rate: 10
  • Fuel Type: Liquid Propane
  • Gas Connection: 3/4 in MNPT
  • Heating Capacity: 199000
  • Ignition Type: Electronic Spark
  • Indoor/Outdoor: Indoor
  • Material: 316L Stainless Steel/Copper
  • Mounting Type: Wall
  • Pressure Rating: 8 to 14 in WC Gas/15 to 150 psi Water
  • Series: H3
  • Temperature Rating: 120 to 160
  • Ultra Low NOx: Yes
  • Vent Size: 4
  • Vent Type: Direct/Power
  • Water Connection: 3/4 in MNPT

Takagi Tankless Water Heater, Series: H3, 199000 Btu/hr Heating, Liquid Propane Fuel, 3/4 in MNPT Gas Connection, Electronic Spark Ignition, Direct/Power Vent, 4 in Vent, Condensing Condensing/Non Condensing, 10 gpm Flow Rate, 0.93, Wall Mounting, 3/4 in MNPT Water Connection, 8 to 14 in WC Gas/15 to 150 psi Water Pressure, 120 to 160 deg F, Yes Ultra Low NOx, 316L Stainless Steel/Copper, Indoor Indoor/Outdoor, 17-3/4 in W x 11-1/4 in D, Commercial/Residential

The T-H3-DV-P is well suited for residential/commercial applications such as small restaurants and beauty salons. Complies with Ultra-Low NOx regulations. Utilizing commercial grade copper alloy for the heat exchanger tubing, the T-H3 is also suitable for heavier residential usages such as space heating or domestic recirculation systems. Certified up to 10100 ft altitude.

QTY
Add to List
  • Features
  • Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel
  • Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
  • Easy-link up to 4 units without a multi-unit controller
  • Multi-link up to 20 units with a multi-unit controller
  • Number of showers unit can handle, depending on ground water temperature
  • Venting with SCH 40/STD PVC, CPVC, PP, category III stainless steel
  • Safety features include freeze, overheat, surge protection and troubleshooting diagnostic codes
  • Integrated temperature controller and advanced diagnostics
  • Standard/Approvals: AHRI Certified|ANSI Z21.10.3|ASHRAE 90.1-2007|CSA 4.3|cCSAus Certified|EnergyStar® Qualified|Low Lead IAPMO R and T Certified|NSF/ANSI 5|SCAQMD Rule 1146.2
  • INCLUDES: Integrated Controls and Power Cord
  • WARRANTY: 15 Years Limited Heat Exchanger, 5 Years Limited P