Bradford White® D75T1253N Flue Damper Gas Water Heater, 75 gal Tank, Domestic, 125000 Btu/hr Heating, Natural Gas Fuel, Atmospheric Vent, 80 %
1122087
MFG #: D75T1253N
$7,792.00
/ ea
- Dimensions: 28-1/4 in Dia x 32-1/2 in D x 72-1/4 in H
- Domestic/Import: Domestic
- Energy Efficiency: 80
- Finish: Vitraglas®
- Fuel Type: Natural Gas
- Gas Connection: 3/4
- Heating Capacity: 125000
- Ignition Type: Electronic
- Material: Steel
- Pressure Rating: 150
- Recovery Rate: 303 gph at 40 deg F Rise
- Tank Capacity: 75
- Temperature Rating: 180
- Type: Flue Damper
- Ultra Low NOx: No
- Vent Size: 5
- Vent Type: Atmospheric
- Water Connection: 1-1/2
- ASME Yes/No: No
Bradford White® Gas Water Heater, Flue Damper, 125000 Btu/hr Heating, Natural Gas, 3/4 in Gas Connection, 75 gal Tank, Electronic Ignition, Atmospheric Vent, 5 in Vent Size, 303 gph at 40 deg F Rise Recovery, 80 % Energy Efficient, 1-1/2 in Water Connection, 150 psi, 180 deg F, Ultra Low NOx: No, ASME Yes/No: No, Steel, Vitraglas®, 28-1/4 in Dia x 32-1/2 in D x 72-1/4 in H, Domestic
ASME and Non-ASME Electronic Ignition models, featuring the ICON HD™ Commercial Control System, provide solutions to applications with various demands for hot water. With capacities ranging from 38 to 100 gal and with inputs from 125000 to 505000 Btu/hr. There's a model that will meet various requirements. Power Vent kits are available for all models.
- Features
- ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes and system ignition functions into a single control board with a digital LCD display
- Operation mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F, and adjusting the degree setting
- Service mode - Eight different digitally displayed service modes can be easily cycled through by pressing the select button
- Electronic ignition - High voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas
- Automatic flue damper
- Factory installed Hydrojet® sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build up in the tank
- Vitraglas® lining
- Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss
- Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Hand hole cleanout
- E.C.O - An automatic re-set energy cut off (E.C.O.) shuts off all gas in event of an overheat condition
- Protective magnesium anode rod
- Sanitizing capability
- Standard/Approvals: AHRI Certified|ANSI Z-21.10.3|ASME HLW Standard|ASHRAE 90.1b|CSA LLC-Low Lead Content|CSA International (Formerly AGA/CGA)|CEC Listed|NSF Approved|North Carolina Code Compliant|PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
- INCLUDES: Temperature and Pressure Relief Valve
- WARRANTY: 3 Years Limited on Tank/1 Year Limited on Componen