Bradford White®

Bradford White® 120A-81-3-120K-AA 120A-kW-3 Electric Water Heater With Fuse, 119 gal Tank, 81000 W, 480 VAC, 3 ph, 97.4 FLA

899968 MFG #: 120A-81-3-120K-AA
$15,420.00 / ea
Bradford White® 120A-81-3-120K-AA 120A-kW-3 Electric Water Heater With Fuse, 119 gal Tank, 81000 W, 480 VAC, 3 ph, 97.4 FLA
  • Amperage Rating: 97.4
  • ASME Yes/No: Yes
  • Dimensions: 30-1/4 in Dia x 64-1/2 in H
  • Domestic/Import: Domestic
  • Heating Element: (9) Incoloy®
  • Material: Steel
  • Phase: 3
  • Power Rating: 81
  • Pressure Rating: 150
  • Recovery Rate: 852
  • Series: 120A-kW-3
  • Tank Capacity: 119
  • Temperature Rating: 180
  • Voltage Rating: 480
  • Water Connection: 1-1/2 in NPT

Bradford White® Electric Water Heater, Series: 120A-kW-3, 119 gal Tank, 480 VAC, 97.4 FLA, 81000 W, 3 ph, 1-1/2 in NPT Water Connection, (9) Incoloy® Heating Element, 852 gph at 40 deg F Rise Recovery, 150 psi, 180 deg F, ASME Yes/No: Yes, Steel, 30-1/4 in Dia x 64-1/2 in H, Domestic

These commercial electric ASME models are constructed to the ASME Code Section IV. They are intended for supplying potable hot water to be commercial and industrial type applications such as schools or government installations.

QTY
Add to List
  • Features
  • Immersion type for accurate temperature control from up to 180 deg F with manual reset high limit control
  • Factory installed Hydrojet® sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank
  • Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
  • Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Water connections - Factory installed true dielectric fittings extend water heater life and simplify water line connections
  • Screw-in style element
  • Low watt density Incoloy® material helps to minimize dry fire and prevents lime build-up
  • Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss
  • This results in less energy consumption, improved operation efficiencies and jacket rigidity
  • Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service
  • Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires
  • Temperature and pressure relief valve installed
  • Low restriction brass drain valve - Durable tamper proof design
  • Hand hole cleanout
  • Standard/Approvals: ASHRAE 90.1b, ASME HLW, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453
  • WARRANTY: 3 Years Limited Tank/1 Year Limited on Component P