WATTS® 0009819 LF26A Small Pressure Regulator, 1/2 in Nominal, FNPT End Style, 300 psi Pressure, Brass Body, Domestic
- Actuator Type: T-Handle
- Body Material: Brass
- Dimensions: 4-3/8 in H
- Domestic/Import: Domestic
- End Style: FNPT
- Inlet to Outlet Length: 2-1/8
- Nominal Size: 1/2
- Pressure Rating: 300
- Series: LF26A
- Softgoods Material: Buna-N®/Stainless Steel
- Temperature Rating: 0 to 140
- Type: Small
WATTS® Pressure Regulator, Small, Series: LF26A, 1/2 in Nominal, FNPT End Style, 300 psi Pressure, 0 to 140 deg F, T-Handle Actuator, 2-1/8 in Inlet to Outlet Length, Brass Body, Buna-N®/Stainless Steel Softgoods, 4-3/8 in H Dimensions, Domestic
This 1/2 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, two-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 3 to 50 psi (0.2 to 3.4 bar) and is factory set at 15 psi (1.0 bar).
- Features
- Tee handle adjustment
- NPT threaded female inlet and outlet connections
- Maximum working pressure is 300 psi (21 bar)
- Oversized orifice
- The wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weight
- Temperature range is 0 to 140 deg F (-18 to 60 deg C)
- Standard/Approvals: ANSI/NSF 61-G | PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- WARRANTY: Limited