Cleanfit Blue Monster®

Cleanfit Blue Monster® 70886 Non-Toxic Thread Seal Tape, 3/4 in W x 1429 in L, 0.0035 in THK, 0.8 g/cu-cm, PTFE

1001016 MFG #: 70886
$8.83 / ea
Cleanfit Blue Monster® 70886 Non-Toxic Thread Seal Tape, 3/4 in W x 1429 in L, 0.0035 in THK, 0.8 g/cu-cm, PTFE
  • Color: Blue
  • Length: 1429
  • Material: PTFE
  • Pressure Rating: 10000
  • Thickness: 0.0035
  • Type: Non-Toxic
  • Width: 3/4

Cleanfit Blue Monster® Thread Seal Tape, Non-Toxic, 1429 in Length, 3/4 in Width, 0.0035 in Thickness, 0.8 g/cu-cm, -400 to 500 deg F, 10000 psi, PTFE, Blue

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

Pack: 27/PK
QTY
Add to List
  • Features
  • Videos
  • Compatible with a broad range of gases and liquids
  • Compatible with a broad range of piping materials will not harden or crack on the joints
  • Effective across a broad range of temperatures and pressures
  • Acts as a thread lubricant and anti-seize
  • Prevents electrolytic corrosion of threads
  • No curing time
  • Unlimited shelf life
  • Non-flammable
  • 99.6 percent PTFE < 0.4 percent composition
  • > 100 percent elongation
  • 15 N/sq-mm tensile strength
  • Pressure rating: Mill-Rose blue monster thread sealing tape has been used to seal fittings carrying water and oil at pressures up to 10000 psi or 69000kPa
  • Temperature range: -450 to 500 deg F PTFE is completely stable up to 500 deg F
  • Decomposition is slow up to 750 deg F
  • Although decomposition will occur on contact with naked flames
  • Note: pressure ratings are relative to the quality and torque of the fittings and the amount of tape used
  • Standard/Approvals: UL Listed