Zoeller®

Zoeller® 294-0003 High Head Waste-Mate 290 Single Phase Single Seal Submersible Sewage Pump, 196 gpm, 2 or 3 in FNPT Outlet, 1-1/2 hp, Cast Iron

1023697 MFG #: 294-0003
$2,230.00 / ea
Zoeller® 294-0003 High Head Waste-Mate 290 Single Phase Single Seal Submersible Sewage Pump, 196 gpm, 2 or 3 in FNPT Outlet, 1-1/2 hp, Cast Iron
  • Amperage Rating: 13.7
  • Bearing Type: Ball
  • Cord Type: 3-Wire Neoprene
  • Dimensions: 19-5/16 in H x 12-7/8 in W
  • Flow Rate: 196
  • Frequency Rating: 60
  • Horsepower: 1-1/2
  • Impeller Type: Non-Clogging Vortex
  • Material: Cast Iron
  • Maximum Head: 62
  • Motor Speed: 3450
  • Outlet Size: 2 or 3 in FNPT
  • Series: Waste-Mate 290
  • Temperature Rating: 130
  • Type: 1-Seal High-Head
  • Voltage Rating: 115
  • Phase: 1

Zoeller® Submersible Sewage Pump, Single Phase Single Seal, Series High Head Waste-Mate 290, 196 gpm, 2 or 3 in FNPT Outlet, 62 ft Maximum Head, 1-1/2 hp, 115 V, 13.7 A, 60 Hz, 3450 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 19-5/16 in H x 12-7/8 in W

Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller's cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, powder coated epoxy finish and hermetically sealed, oil-filled motor add up to a long lasting, trouble-free product.

QTY
Add to List
  • Features
  • Durable, cast iron constructed switch case, base, motor and pump housing
  • No sheet metal parts to rust or corrode
  • All cast iron class 30 30000 lb tensile strength
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 ph only) motor
  • Shaft seal - stainless steel carbon and ceramic rotary
  • 1117 carbon steel motor shaft (single seal models)
  • Corrosion-resistant, powder coated epoxy finish
  • Upper and lower ball bearing running in a bath of oil
  • Neoprene square ring and gasket
  • All models pass 2 in spherical solids
  • Automatic units available with float-operated, submersible, 2-pole mechanical switch
  • On point: 15-3/4 in, off point: 5-1/4 in
  • 100% computerized tested
  • 20 ft cord
  • Automatic operation
  • Permanent split capacitor or 3 phase motor type
  • Class F insulation
  • Standard/Approvals: cCSAus Certified, SSPMA Standard, UL Listed