Zoeller® 267-0011 Waste-Mate 260 Submersible Pump, 128 gpm, 2 or 3 in NPT Outlet, 1/2 hp, 14-5/16 in H
- Amperage Rating: 2.6
- Bearing Type: Sleeve
- Cord Type: 3-Wire Neoprene
- Dimensions: 14-5/16 in H
- Flow Rate: 128
- Frequency Rating: 60
- Horsepower: 1/2
- Impeller Type: Non-Clogging Vortex
- Material: Cast Iron
- Maximum Head: 21-1/2
- Motor Speed: 1750
- Outlet Size: 2 or 3 in NPT
- Series: Waste-Mate 260
- Temperature Rating: 130
- Voltage Rating: 200 to 208
- Phase: 3
Zoeller® Submersible Pump, Series Waste-Mate 260, 128 gpm, 2 or 3 in NPT Outlet, 21-1/2 ft Maximum Head, 1/2 hp, 200 to 208 V, 2.6 A, 60 Hz, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 14-5/16 in H
Considered one of America's most popular sewage ejectors, this robust family of pumps is known for reliability, durability and performance. These pumps are industry proven, built of cast iron with stainless steel hardware. The integral, preset snap- action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with powder coated epoxy finish provides maximum pumping performance under the most extreme conditions. With a cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long lasting, trouble-free product.
- Features
- Float-operated and 2-pole mechanical switch
- Durable cast construction, ASTM Class 25 cast iron switch case and pump housing
- Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph), model 267 available with cast iron impeller (standard on 3 ph models)
- Not affected by materials normally found in drainage and sewage pumps
- Stainless steel screws, bolts, handle, guard, arm and seal assembly
- Neoprene square ring and gasket
- Oil-filled, hermetically-sealed motor
- Oil-lubricated bearings
- Carbon and ceramic shaft seal
- Corrosion-resistant, powder coated epoxy finish
- Completely submersible
- Watertight and dust-tight
- Automatic and non-automatic models available
- Models available packaged with piggyback variable level float switch
- Automatic reset thermal overload protection (1 Ph only)
- 12 in on point, 4 in off point
- Minimum recommended basin size (small load applications) - simplex 18 in x 30 in (45.7 x 76.2 cm), duplex 30 in x 36 in (76.2 x 91.4 cm)
- High water alarms available
- 10 in auto/15 in non auto, 3-wire neoprene cord and plug
- Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic
- Standard/Approvals: cSAUS Certified, UL Listed