Bell & Gossett

Bell & Gossett 102210 3-Piece Booster Pump, 115 VAC

9148 MFG #: 102210
$1,065.00 / ea
Bell & Gossett 102210 3-Piece Booster Pump, 115 VAC
  • Amperage Rating: 1.9
  • Bearing Type: Sleeve
  • Dimensions: 15-3/8 in L x 8-1/2 in H
  • Frequency Rating: 60
  • Impeller Type: Centrifugal
  • Maximum Pressure: 125
  • Motor Speed: 1725
  • Power Rating: 1/6
  • Temperature Rating: 225
  • Type: 3-Piece
  • Voltage Rating: 115
  • Phase: 1

Bell & Gossett Booster Pump, 3-Piece, Model HV NFI, 1/6 hp, 115 VAC, 1.9 A, 60 Hz, 125 psi Maximum, 1725 rpm Motor, Centrifugal Impeller, 225 deg F, Sleeve Bearing, 15-3/8 in L x 8-1/2 in H

For applications requiring higher flow and head pressures, Bell and Gossett provides an entire range of booster pumps. The designs of these pumps are based on three-part configuration which offers complete field reparability and compact construction. All Bell and Gossett boosters are equipped with the incomparable B and G manufactured motor for quiet and efficient operation.

QTY
Add to List
  • Features
  • Oil lubricated circulator
  • Cast iron body
  • 115 V with built-in overload protection
  • Sleeve bearing, oil lubricated with replaceable resilient motor mounts
  • Noise dampening coupler
  • Bell & Gossetts own flexible spring design adds to quiet operation, do not accept a substitute
  • Long bronze sleeve bearings maintain exact shaft alignment
  • Provides for constant circulation of oil over bearing surfaces
  • Precision ground pump shaft is oversized to provide large bearing surfaces
  • Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
  • The Bell & Gossett standard mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems
  • Centrifugal impeller prevents accumulation of air at seal faces to assure long life
  • Close impeller/body tolerances minimize water slippage and maximize efficiency
  • Single phase motor
  • 3/4, 1-1/4 and 1-1/2 in NPT flange
  • Steel, Zinc Plated or Lead-Free Brass impeller
  • Drip proof motors
  • Recommended for indoor use only
  • Model HV NFI
  • Standard/Approvals: CSA Certified|cUL/UL Listed|SA Registered